Exhaust Capristo Porsche Cayenne 4.0 V8 Turbo

Capristo Porsche Cayenne 4.0 V8 Turbo

Cat-back exhaust system with valves for Porsche Cayenne V8 Turbo (958 92A, years 05/2010-09/2014), entirely in 1.4828 (T309) stainless steel, with non-silenced centre pipe. The original exhaust tailpipes are used.

With the CES-3 control unit the system is freely programmable and controlled according to back pressure: you set the back pressure you want to drive with, so as to obtain the maximum available power and eliminate the share of back pressure that costs power. Most valved exhausts open their valves according to speed or revs, but the engine is affected by back pressure, which increases with revs. The control unit has control LEDs and an RDS transmitter that sends values and functions to the car radio display, and it is adjusted with the key fob remote controls. The Capristo-Control-Center software is supplied, in German, Italian and English, with which you can view all values and make all settings. Three modes: Cruise (the valves open later), Sport (the valves open earlier) and Open (valves always open). In Cruise and Sport you set the valve opening threshold, and you can choose the mode in which the car starts. The control unit recognises the driving style: if you accelerate aggressively it detects the back pressure building up and opens the valves immediately, while with moderate driving it opens them later. The CES-3 also measures GPS and acceleration data (g-force), some of which can already be read with the software, and from version 3.020 it can show the dealer's name on the radio display; the device is under continuous development and software updates can be downloaded from the Capristo download area.

Capristo recommends not revving the engine with the car standing still: the flames from the exhaust can cause damage to nearby property and people.

ECE homologated, approved for road use.

Comes with everything needed for installation and replaces the original exhaust system. Capristo warranty: 3 years from the production date. Made from 309 stainless steel. 100% Made in Germany.

Capristo Automotive was founded in 1990 in Germany as a Ferrari exhaust specialist by Antonio Capristo. Today it is regarded as one of the world's leading manufacturers of high-performance exhaust systems, with its headquarters and production facility in Sundern, Germany, and several international patents on sport exhaust technology. Every Capristo system is made from 309 stainless steel with mandrel-bent tubing and fully hand-welded construction, able to withstand temperatures above 600 degrees. Capristo is also the official exhaust partner of Lamborghini Squadra Corse.

Delivery times vary: contact us for tailored advice before ordering.