Brake Pads Pagid Racing 1539 RSL2 E1539RSL2

Pagid Racing E1539RSL2
Brake pads racing RSL 2 - shape 1539

Pagid Racing is the racing brand of the German TMD Friction group based in Essen: for more than 30 years it has developed brake pads, discs and brake fluid for motorsport, with compounds engineered in Germany and tested on circuits all over the world.

The RSL family is Pagid Racing's endurance range: wide operating temperature window, very good modulation, slightly progressive friction during the stop, low heat conductivity, disc friendly and works very well with ABS. Because of the pad colour many people simply call them "Pagid yellow".

The RSL 2 is an endurance compound derived from RSL 1: friction level between RSL 1 and RSL 29, even lower pad and disc wear and very stable friction at all temperatures. For GT, touring cars and endurance prototypes.

Part number: E1539RSL2
Shape: 1539
Compound: RSL 2
Thickness: 25 mm
Dimensions (length x width): 152 x 63 mm
Backplate thickness: 5 mm
Axle: front
Pagid note: Alcon, AP Racing
Related shapes (other thicknesses): 1904, 8250
Package contents: pad set for one axle

Same shape, other compounds: E1539RSL1, E1539RSL1E, E1539R29, E1539RSL2E, E1539RST1, E1539RST2E, E1539RST3, E1539RST5E, E1539RSX001

Images: the first photo shows the RSL family box and colour and is for reference only; the actual outline is the one in the shape 1539 drawing.

Race pads must be bedded in before track use: follow Pagid's bedding procedure or ask us how to do it. Product intended for track and competition use.

Compatibility:
Vehicles
BMW M2 CS Racing [Permit B 365PS] (from 2020) - front
BMW M2 CS Racing [Permit B 365PS] (2020) - front
McLaren 570 S GT4 [race car] Alcon front Calipers (from 2020) - front
McLaren 570S GT4 [race car] Alcon calipers (from 2018) - front
Audi RS3 LMS TCR [race car] (from 2021) - front
Audi RS3 LMS TCR [race car] (2016-2020) - front
Audi TT Cup [race car] (from 2015) - front
Mercedes CLA Cup [race car] (from 2012) - front
Aston Martin Vantage V8 GT4 ProDrive [race car] Alcon caliper (from 2018) - front
Honda (Acura) Civic Type-R TCR [race car] (from 2018) - front
VW Golf GTI TCR [race car] (from 2015) - front
Seat Leon Cup Racer MK3 [race car] (2014-2017) - front
Cupra Leon Competición TCR [race car] (Alcon calipers) (from 2020) - front
Cupra Leon Cupra TCR [race car] (AP calipers) (from 2015) - front
Renault Megane RS TCR [race car] (from 2018) - front
Subaru WRX STI TCR (from 2016) - front
Peugeot 308 TCR (from 2018) - front
Opel Astra TCR [race car] (from 2016) - front
Opel Astra OPC [race car] (from 2015) - front
CUPRA Leon Competición TCR [Mk4 race car] (Alcon calipers) (from 2020) - front
CUPRA Leon CUPRA TCR [Mk3 race car] (AP calipers) (2014-2019) - front
Ginetta G55 GT4 [race car] - front
KIA Cee’d TCR (from 2017) - front
Lada Vesta Sport TCR [race car] (from 2018) - front
Lynk & Co 03 TCR (from 2019) - front
SAIC Motors - MG 6 XPower TCR (from 2020) - front
Brake calipers
Alcon TA6, CAR89, CAR11 [4489] D54
AP Racing CP3558 D46 / D51 / D54

List taken from the official Pagid Racing 2026 catalogue. Road cars listed refer to the standard brake system unless stated; for race cars the fitted caliper is what counts. If in doubt, contact us before ordering.

Discover all Pagid brake pads, Racing and Street+.