Pagid Racing E1749RSH3
Brake pads racing RSH 3 - shape 1749
Pagid Racing is the racing brand of the German TMD Friction group based in Essen: for more than 30 years it has developed brake pads, discs and brake fluid for motorsport, with compounds engineered in Germany and tested on circuits all over the world.
The RSH family is dedicated to historic racing, with applications from late-1950s cars up to the 1990s: good modulation, slightly progressive friction, disc friendly and a wide temperature range.
The RSH 3 is a metal-ceramic compound with high initial bite that stays linear at high temperature, good modulation, quick bedding and good pedal feel. It stays consistent under heavy loads up to around 800 °C and has low heat conductivity. For historic rally, GT and touring cars and club racing.
Part number: E1749RSH3
Shape: 1749
Compound: RSH 3
Thickness: 16 mm
Dimensions (length x width): 113.5 x 46 mm
Backplate thickness: 5 mm
Axle: rear
Pagid note: Alcon, AP Racing
Package contents: pad set for one axle
Same shape, other compounds: E1749RSH42, E1749R29, E1749RST2, E1749RST4, E1749RST5E
Images: the first photo shows the RSH family box and colour and is for reference only; the actual outline is the one in the shape 1749 drawing.
Race pads must be bedded in before track use: follow Pagid's bedding procedure or ask us how to do it. Product intended for track and competition use.
Compatibility:
Vehicles
Mitsubishi Lancer Evo X Gravel Rally [AP Caliper] (2007-2016) - rear
Brake calipers
Alcon H type [4463] D40 / D44 / D48
AP Racing CP 2361
AP Racing CP 2361-96/97 S4QR
AP Racing CP2340 D40 / D48
AP Racing CP3228-26/27 S4
List taken from the official Pagid Racing 2026 catalogue. Road cars listed refer to the standard brake system unless stated; for race cars the fitted caliper is what counts. If in doubt, contact us before ordering.
Discover all Pagid brake pads, Racing and Street+.
