Pagid Racing E4304RSH3
Brake pads racing RSH 3 - shape 4304
Pagid Racing is the racing brand of the German TMD Friction group based in Essen: for more than 30 years it has developed brake pads, discs and brake fluid for motorsport, with compounds engineered in Germany and tested on circuits all over the world.
The RSH family is dedicated to historic racing, with applications from late-1950s cars up to the 1990s: good modulation, slightly progressive friction, disc friendly and a wide temperature range.
The RSH 3 is a metal-ceramic compound with high initial bite that stays linear at high temperature, good modulation, quick bedding and good pedal feel. It stays consistent under heavy loads up to around 800 °C and has low heat conductivity. For historic rally, GT and touring cars and club racing.
Part number: E4304RSH3
Shape: 4304
Compound: RSH 3
Thickness: 15 mm
Dimensions (length x width): 61.8 x 57 mm
Backplate thickness: 4.5 mm
Axle: front and rear
Pagid note: Brembo, Porsche, StopTech
Related shapes (other thicknesses): 2723
Package contents: pad set for one axle
Same shape, other compounds: E4304R14, E4304RSH29E, E4304RSH42, E4304R29
Images: the first photo shows the RSH family box and colour and is for reference only; the actual outline is the one in the shape 4304 drawing.
Race pads must be bedded in before track use: follow Pagid's bedding procedure or ask us how to do it. Product intended for track and competition use.
Compatibility:
Vehicles
Porsche 911 2.7 / 3.0 / 3.2 Carrera (1972-1989) - rear
Porsche 911 S (1972-1983) - rear
Porsche 914/4 (1970-1972) - front
Porsche 914/6 (1970-1972) - front and rear
Porsche 911 2.0 M-Calipers (1965-1969) - front
Porsche 912 (1965-1970) - front
Porsche 911 2.0 -2.8 S-Calipers (1964-1973) - rear
Porsche 356 1.6 C/SC (1963-1966) - front
Porsche 904 Carrera GTS + 904/6 (1963-1965) - front
BMW M1 [non Procar] (1978-1982) - rear
BMW M1 Procar (1978-1982) - rear
BMW 1600 Ti/1800 Ti/TiSA (1963-1971) - front
Ferrari 308GT4/GTB/GTS 2 valve (1973-1985) - rear
Ferrari Dino 246 GTB/GTS (1968-1975) - rear
Lamborghini Countach (1974-1991) - rear
Audi 50 (1974-1979) - front
Audi 100 (1968-1974) - front and rear
Audi 60/75 (1966-1972) - front
Mercedes 200-300 (W123) (1976-1985) - rear
Mercedes 280-450 (W116) (1972-1980) - rear
Mercedes 250-280 (W114) (1971-1976) - rear
Mercedes 190-300 (W108-W115) (1959-1971) - rear
VW Golf 1.1/1.3/1.6 GTI (1975-1983) - front
Hyundai Veloster N TCR (from 2018) - rear
Hyundai i30 N TCR race car [Brembo caliper] (from 2017) - rear
Alfa Romeo Berlina 1.75 2.0 (1968-1977) - rear
Alfa Romeo Giulia 1.3/1.6 (1966-1976) - front
Opel Commodore B (1972-1977) - rear
Opel Ascona A (1970-1975) - front
Opel GT (1969-1973) - front
Opel Kadett B 1.5/1.9/ Kadett C (1967-1979) - front
Lancia Stratos (1974-1975) - rear
Saab 99 (1967-1974) - front
Talbot Simca 1000 Rallye II+III (1972-1981) - front
Brake calipers
Brembo 07.1715. [type "62" family]
Dunlop 07.1715.5
StopTech ST21
List taken from the official Pagid Racing 2026 catalogue. Road cars listed refer to the standard brake system unless stated; for race cars the fitted caliper is what counts. If in doubt, contact us before ordering.
Discover all Pagid brake pads, Racing and Street+.
