Brake Pads Pagid Racing 2704 RSL19 E2704R19

Pagid Racing E2704R19
Brake pads racing RSL 19 - shape 2704

Pagid Racing is the racing brand of the German TMD Friction group based in Essen: for more than 30 years it has developed brake pads, discs and brake fluid for motorsport, with compounds engineered in Germany and tested on circuits all over the world.

The RSL family is Pagid Racing's endurance range: wide operating temperature window, very good modulation, slightly progressive friction during the stop, low heat conductivity, disc friendly and works very well with ABS. Because of the pad colour many people simply call them "Pagid yellow".

The RSL 19 wears slowly, is gentle on discs and has a wide temperature range with excellent modulation. On heavier, more powerful GT cars (GT3/GTE) it is used at the rear with RSL 1 or RSL 2 at the front; on lighter GT and touring cars also at the front.

Part number: E2704R19
Shape: 2704
Compound: RSL 19
Thickness: 26.5 mm
Dimensions (length x width): 132 x 62 mm
Backplate thickness: 5 mm
Axle: rear
Pagid note: Audi, Brembo
Related shapes (other thicknesses): 1595, 1607, 1674, 8037, 8191, 8267
Package contents: pad set for one axle

Same shape, other compounds: E2704RSLD1, E2704RSTD1, E2704RSL1

Images: the first photo shows the RSL family box and colour and is for reference only; the actual outline is the one in the shape 2704 drawing.

Race pads must be bedded in before track use: follow Pagid's bedding procedure or ask us how to do it. Product intended for track and competition use.

Compatibility:
Vehicles
Porsche 991.2 GT2 RS Clubsport [race car] (from 2019) - rear
BMW M2 CS Racing [Permit A 450PS] (2019-2021) - rear
BMW M8 GTE [race car] (from 2018) - rear
Ferrari 488 GTE [race car] (from 2017) - rear
Ferrari 458 GTE [race car] (2014-2016) - rear
Audi R8 LMS GT3 Evo II (from 2021) - rear
Audi R8 LMS GT2 [race car] (from 2020) - rear
Audi R8 LMS GT3 Evo (2019-2021) - rear
Audi R8 LMS GT3 [race car] (2016-2019) - rear
Aston Martin Vantage V8 GTE [race car] Alcon caliper (from 2018) - rear
Aston Martin Vantage V12 GT3 [race car] Alcon caliper (from 2018) - rear
Aston Martin Vantage V12 GT3 [race car] endurance (2015-2017) - rear
Aston Martin Vantage V8 GTE [race car] (2012-2017) - rear
Honda (Acura) NSX GT3 [race car] (from 2017) - rear
Toyota GR Supra GT4 [race car] (Brembo calipers) (from 2020) - rear
Chevrolet Callaway Z06.R GT3 [race car] (from 2016) - rear
Alpine A110 Cup (from 2017) - rear
Alpine A110 GT4 (from 2017) - rear
Bentley Continental GT3 [race car] (from 2018) - rear
Dodge Viper SRT GT3-R (2013-2017) - rear
Brake calipers
Brembo 07.5139. [type "132" or B13 family]

List taken from the official Pagid Racing 2026 catalogue. Road cars listed refer to the standard brake system unless stated; for race cars the fitted caliper is what counts. If in doubt, contact us before ordering.

Discover all Pagid brake pads, Racing and Street+.