• New
Pagid Racing 5103 K1 E5103K1 - shape 5103 drawing
Free shipping across the European Union for orders over €400

SPENDING OVER €400?
GET FREE SHIPPING ACROSS THE EU*!

At M4Tuning, we reward you: enjoy free shipping across the European Union when your order exceeds €400!

*Some areas excluded: Malta, Canary Islands, Réunion, Ireland, Greece, and Cyprus.
Pay in convenient interest-free installments with Klarna on M4Tuning

PAY IN EASY INSTALLMENTS WITH KLARNA

Select Klarna at checkout and split your purchase into interest-free payments, with no additional costs.

*Subject to approval by Klarna at the time of checkout.

FOLLOW US ON INSTAGRAMFOLLOW US ON FACEBOOK
M4Tuning Instagram Profile M4Tuning Facebook Page

Brake Pads Pagid Racing 5103 K1 E5103K1

Pagid Racing Brake Pads

E5103K1
Pagid

Pagid Racing E5103K1
Brake pads racing K1 - shape 5103

Pagid Racing is the racing brand of the German TMD Friction group based in Essen: for more than 30 years it has developed brake pads, discs and brake fluid for motorsport, with compounds engineered in Germany and tested on circuits all over the world.

The K compounds are Pagid Racing's karting pads: consistent friction over time and temperature, short pedal travel and disc friendly.

The K1 is a medium-high friction metal-ceramic karting compound: very good initial bite, direct pedal feel, excellent modulation and release, low heat conductivity and flat friction up to high temperatures. Suits a wide range of kart classes.

Part number: E5103K1
Shape: 5103
Compound: K1
Axle: rear
Package contents: pad set for one axle

Same shape, other compounds: E5103K2

Image: official Pagid drawing of shape 5103.

Race pads must be bedded in before track use: follow Pagid's bedding procedure or ask us how to do it. Product intended for track and competition use.

Compatibility:
Kart
Tony Kart DD2 (from 2004) - rear
Tony Kart KZ Shifter (from 2004) - rear

List taken from the official Pagid Racing 2026 catalogue. Road cars listed refer to the standard brake system unless stated; for race cars the fitted caliper is what counts. If in doubt, contact us before ordering.

Discover all Pagid brake pads, Racing and Street+.

Compound K1 (karting), shape 5103.
Fits: Tony Kart DD2, Tony Kart KZ Shifter

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€82.96
Tax included
Rating:
(0)
Loyalty Points
Earn 82 points  buying this product.
You will save €1.23 on your next order!
Quantity

Free shipping across the European Union for orders over €400

SPENDING OVER €400?
GET FREE SHIPPING ACROSS THE EU*!

At M4Tuning, we reward you: enjoy free shipping across the European Union when your order exceeds €400!

*Some areas excluded: Malta, Canary Islands, Réunion, Ireland, Greece, and Cyprus.
Pay in convenient interest-free installments with Klarna on M4Tuning

PAY IN EASY INSTALLMENTS WITH KLARNA

Select Klarna at checkout and split your purchase into interest-free payments, with no additional costs.

*Subject to approval by Klarna at the time of checkout.

FOLLOW US ON INSTAGRAMFOLLOW US ON FACEBOOK
M4Tuning Instagram Profile M4Tuning Facebook Page

 

WE SHIP EVERY ORDER DIRECTLY FROM OUR WAREHOUSE IN ITALY, USING ONLY SELECTED EXPRESS COURIERS.

 

NOT ALL ITEMS ARE IMMEDIATELY AVAILABLE. ASK US FOR CURRENT STOCK STATUS.

8 other products in the same category:

Pagid Racing 1361 RST3 E1361RST3 - Pagid Racing RST box
  • New
Pagid
E1361RST3

Pagid Racing 1361 RST3 E1361RST3

Compound RST 3 (rally and sprint, the red Pagid pads), shape 1361, thickness 17 mm.
Fits: Audi S1 Sport Quattro Rally Car, Renault Clio II V6 [race car], Mitsubishi Lancer Evo X Gravel Rally [AP Caliper], Peugeot 208 N5 Spec. 2015, Citroën DS3 N5 spec. 2016 and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€338.55
More
Pagid Racing 6008 UTV1 E6008UT1 - shape 6008 drawing
  • New
Pagid
E6008UT1

Pagid Racing 6008 UTV1 E6008UT1

Compound UTV 1 (UTV side-by-side), shape 6008.

Before ordering compare shape and dimensions with the pads of your caliper or ask us for advice.

€276.33
More
Pagid Racing 2564 RST3 E2564RST3 - Pagid Racing RST box
  • New
Pagid
E2564RST3

Pagid Racing 2564 RST3 E2564RST3

Compound RST 3 (rally and sprint, the red Pagid pads), shape 2564, thickness 30 mm.
Fits: Porsche 991.2 GT3 R [race car], Porsche 991 RSR GTE [race car], BMW M4 GT3, Ferrari 296 GT3 [race car], Mercedes AMG GT4 [race car], Mercedes AMG GT GT3 [race car] and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€638.06
More
Pagid Racing 8049 RST4 E8049RST4 - Pagid Racing RST box
  • New
Pagid
E8049RST4

Pagid Racing 8049 RST4 E8049RST4

Compound RST 4 (rally and sprint, the red Pagid pads), shape 8049, thickness 16 mm.
Fits: Dallara F317 (Formula F3) Brembo Caliper, Dallara F312 (Formula F3) Brembo Caliper, Dallara F308 (Formula F3) Brembo Caliper and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€420.29
More
Pagid Racing 4928 RSX E4928RSX001 - shape 4928 drawing
  • New
Pagid
E4928RSX001

Pagid Racing 4928 RSX E4928RSX001

Compound RSX (premium endurance), shape 4928, thickness 28 mm.
Fits: Porsche Cayman GT4 Clubsport [PFC brakes 28/26 mm], Porsche Cayman GT4 MR [PFC brakes 28/26 mm], Porsche 991 GT3 Cup [PFC brakes 28/26 mm], Porsche 991 GT3 Cup MR [PFC brakes 28/26 mm]

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€991.86
More
Pagid Racing 8033 RST5E E8033RST5E - Pagid Racing RST box
  • New
Pagid
E8033RST5E

Pagid Racing 8033 RST5E E8033RST5E

Compound RST 5E (rally and sprint, the red Pagid pads), shape 8033, thickness 17.5 mm.
Fits: Mitsubishi Lancer Evo X Gravel Rally / FIA Gr. N, Peugeot 207 Asphalt Rally and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€728.95
More
Pagid Racing 4304 RSH29E E4304RSH29E - Pagid Racing RSH box
  • New
Pagid
E4304RSH29E

Pagid Racing 4304 RSH29E E4304RSH29E

Compound RSH 29E (historic cars), shape 4304, thickness 15 mm.
Fits: Porsche 911 2.7 / 3.0 / 3.2 Carrera, Porsche 911 S, Porsche 914/4, Porsche 914/6, Porsche 911 2.0 M-Calipers, Porsche 912, Porsche 911 2.0 -2.8 S-Calipers, Porsche 356 1.6 C/SC and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€262.30
More
Pagid Racing 1361 RST1 E1361RST1 - Pagid Racing RST box
  • New
Pagid
E1361RST1

Pagid Racing 1361 RST1 E1361RST1

Compound RST 1 (rally and sprint, the red Pagid pads), shape 1361, thickness 17 mm.
Fits: Audi S1 Sport Quattro Rally Car, Renault Clio II V6 [race car], Mitsubishi Lancer Evo X Gravel Rally [AP Caliper], Peugeot 208 N5 Spec. 2015, Citroën DS3 N5 spec. 2016 and more versions (see list below)

Before ordering check the compatibility list at the bottom of the page or ask us for advice.

€416.63
More